Cutting bench
Paper size and cut yield calculator
Estimate a simple rectangular cut yield with optional gutters. Both orientations are tested, and the more productive arrangement is reported with area utilization.
OUTPUT
READY WHEN YOU AREEnter your production values, then calculate.
Results appear here and stay in this browser.CHECK INPUT
NOT CALCULATEDInput needs attention
Review the highlighted field, then calculate again.RESULT
CALCULATED LOCALLYProduction calculations are estimates. Verify critical dimensions with your printer or finishing provider.
Method
How to use this tool
- 01
Enter parent-sheet and finished-piece dimensions in one unit.
- 02
Add the required gap between adjacent pieces.
- 03
Enable rotation when grain direction or artwork orientation allows it.
Assumptions
What the math assumes
- Pieces are arranged in a regular grid with straight guillotine cuts.
- No outer margin, gripper, bleed, or color bar is included unless folded into the entered dimensions.
- Waste percentage compares piece area with full sheet area.
Production limits
Verify before output
- Mixed-orientation nesting and irregular shapes may produce a better yield.
- Grain direction, press constraints, and finishing sequence can rule out the mathematical maximum.
Desk reference
Frequently asked questions
Does the gutter apply at the sheet edges?
No. The entered gutter is placed only between adjacent pieces.
Why can actual production yield be lower?
The calculation does not reserve gripper, side lay, color bars, trim allowance, or spoilage unless you include them in your dimensions.