Step-and-repeat
Label sheet layout calculator
Lay out equal rectangular labels using explicit sheet margins and horizontal and vertical gaps. The result reports the exact grid footprint and unused edge space.
No upload. No account. Results stay on this device.
INPUT / OUTPUT08
OUTPUT
READY WHEN YOU AREEnter your production values, then calculate.
Results appear here and stay in this browser.CHECK INPUT
NOT CALCULATEDInput needs attention
Review the highlighted field, then calculate again.RESULT
CALCULATED LOCALLYProduction calculations are estimates. Verify critical dimensions with your printer or finishing provider.
Method
How to use this tool
- 01
Enter sheet, label, margin, and gap dimensions.
- 02
Calculate the maximum regular grid.
- 03
Use the reported trailing clearance to center or position the grid in artwork.
Assumptions
What the math assumes
- Labels are axis-aligned in one regular grid.
- Margins are equal on opposite sides.
- Gap is clear distance between label edges.
Production limits
Verify before output
- Does not optimize mixed rotations, staggered shapes, or circular nesting.
- Dieline, matrix stripping, cutter tolerances, and registration marks may require more space.
Desk reference
Frequently asked questions
Can labels rotate automatically?
This calculator keeps all labels in one orientation. Swap width and height to compare a rotated layout.
Are the outside margins included in the gaps?
No. Margins reserve the sheet edges; gaps apply only between labels.